Outline Dimension


Model Specifications

Model |
Motor Volt |
Solenoid Valve Volt |
Motor Power |
Rated Speed |
Displacement |
System Pressure |
Tank Capacity |
L(mm) |
YBZ5-F2.7B4G40/MNVBE1 |
380VAC |
24VDC |
1.5KW |
1430/1650RPM |
2.7ml/r |
20MPa |
5L |
633 |
YBZ5-F2.5B4G40/MNVBE1 |
2.5ml/r |
6L |
678 |
YBZ5-F2.1B4G40/MNVBE1 |
12VDC |
2.1ml/r |
8L |
783 |
Remark:Please go to page 3 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
Special Notes

1.The AC motor is of S3 duty cycle,which can only work intermittently and repeatedly,i.e.,1 minute on and 9 minutes off.
2.Clean all the hydraulic components concerned before installation of the power unit.
3.Viscosity of the oil should be 15~68 CST and the oil should be clean and free of impurities,N46 hydraulic oil is recommended.
4.Check the oil level in the tank after the initial running of the power unit.
5.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.